Limited quantity. Ongoing production. Call or email for large quantity inquiry. This product requires our WS-120V / WS-277V / WS1C / KPLC The R...
View full details
Can be easily swapped with choice of color with 2 simple screws on the keypads Five colors available; White, Light Almond, Almond, Ivory, and Blac...
View full details
Can be easily swapped with choice of color with 2 simple screws on the keypads Six colors available; Light Almond, Almond, Ivory, Black, Brown and...
View full details
Many advantages of this style of wall switch. Rated at 15A. 120VAC Install in a normal US single gang box Attractive screw-less wall plate as pa...
View full details
Many advantages of this style of wall switch. Rated at 15A. 120VAC Install in a normal US single gang box Attractive screw-less wall plate as pa...
View full details
Sold out
Many advantages of this style of wall switch. Rated at 15 A. 120VAC Install in a normal US single gang box Attractive screw-less wall plate as p...
View full details
HLCK6 style keypad button set engraved with the buttons default for HAI keypads. NOTE: This is a set of 6 engraved buttons only. The keypad is not ...
View full details
Ongoing production. Limited quantities. Designed for use as a Room Controller with the HAI OMNI. Configured for four room scenes plus ON and OFF....
View full details
Equivalent to the HAI 35A00-1 600w Dimming Switch Contains HAI firmware and will be recognized by the PC-Access software and HAI OMNI as a HAI pro...
View full details
Equivalent to the HAI 55A00-1 1000w Dimming Switch Contains HAI firmware and will be recognized by the PC-Access software and HAI OMNI as a HAI pr...
View full details
Equivalent to the HAI 40A00-1 Relay Switch Works along side with RWS (Remote Wall Switch) with traveler wire Use with heavy loads up to 15A, Motor...
View full details
Frequently eliminates the issue of LED fixtures/bulbs not being turned off or flickering at certain level Circuit based design, dissipates only 1....
View full details
The LED LevelSet Module, when installed in a LED fixture with a 0-10V input to its driver can be configured to change the on-level of the fixture. ...
View full details
Sold out
Limited in quantity. The PIM-E is a special Powerline Interface Module containing an ELK Products built-in M1XSP Serial Port chip. This all-in-one ...
View full details
Handles appliance up to 12 amps for ON/OFF load control May be a member of up to 16 scenes. Auto-off timer up to 120 Minutes Pass-through outlet ...
View full details
The DBM Doorbell Ring Interface Module (DBM) is a small plug-in device designed to sense the current of a doorbell ring to trigger the transmission...
View full details
Each channel can act as a dimmer or an ON/OFF switch, depending on its programming Each channel may be a member of 16 different scenes/links 400W ...
View full details
Handles appliance up to 20 amps for ON/OFF control load Easy lockout fitment on a single/multiple gang or junction box for simple placement Simil...
View full details
The ICM Input Control Module is a high quality plug-in home automation controller device designed to interface off-the-shelf low voltage or contact...
View full details
Keeps electrical noise generated by certain electrical devices from reaching the powerline Rated at 1.8 Amps maximum at 120VAC Simple wiring with ...
View full details
Frequently eliminates the issue of LED fixtures/bulbs not being turned off or flickering at certain level 10K Ohm, 10-Watt, dissipates only 1.4 wa...
View full details
The IRR-2 is a small infra-red remote control which reproduces all of the push-buttons on the 6-Button Keypad Controller. Pressing a button on the ...
View full details
KPC-7 button set engraved with the buttons default names. Three colors available; White, Black, and Light Almond What is included? Engraved butt...
View full details
