Interfaces

PulseWorx PIM-U: Powerline Interface Module, USB
$150.00

PulseWorx PIM-U: Powerline Interface Module, USB

USB serial interface connects to any available USB port. USB cable included. Pass-through outlet allows plugging of devices that do not require re...

View full details
$150.00
PulseWorx PIM-R: Powerline Interface Module, RS232
$150.00

PulseWorx PIM-R: Powerline Interface Module, RS232

RS-232 serial interface connects to any available COM port via a DB9 serial cable. The DB9 cable is included. Pass-through outlet allows plugging ...

View full details
$150.00
PulseWorx PIM-IP: Powerline Interface Module, Ethernet Interface
$400.00

PulseWorx PIM-IP: Powerline Interface Module, Ethernet Interface

Allows IP control of a UPB network UPStart version 6.0 Build 30 or higher required Dual-Transmitter Circuitry LED shows status of UPB signals Stor...

View full details
$400.00
PulseWorx PGW: Gateway Interface
$480.00

PulseWorx PGW: Gateway Interface

Empowers the use of mobile devices, smart phones and/or tablets to control PulseWorx systems Apple iPhone, iPad Mini, iPad applications available...

View full details
$480.00
PulseWorx TCM: Telephone Control Module, 2 Lines
$200.00

PulseWorx TCM: Telephone Control Module, 2 Lines

Telephone Control Module (TCM)The TCM Telephone Ring Interface Module is a small plug-in device designed to sense a telephone ring to trigger the t...

View full details
$200.00
PulseWorx DBM: Door Bell Module, 2 Channels
$200.00

PulseWorx DBM: Door Bell Module, 2 Channels

The DBM Doorbell Ring Interface Module (DBM) is a small plug-in device designed to sense the current of a doorbell ring to trigger the transmission...

View full details
$200.00
PulseWorx OPA: OMNI PIM-R Adaptor
$38.00

PulseWorx OPA: OMNI PIM-R Adaptor

Adapter to connect a PIM-R to the OMNI interface port. No cable is included. Use the existing cable that connected the OMNI and the HAI PIM.

$38.00
PulseWorx PW513 - X10 to UPB Bridge, X10 to UPB
$108.00

PulseWorx PW513 - X10 to UPB Bridge, X10 to UPB

The PW513 X-10 to UPB Bridge is a small plug-in electronic device that converts standard X-10 formatted messages into corresponding UPB Communicati...

View full details
$108.00
XPW713 - X10 to UPB Converter, X10 from the power line to UPB
$116.00

XPW713 - X10 to UPB Converter, X10 from the power line to UPB

The XPW713 X-10 to UPB Converter is a small plug-in electronic device that converts standard X-10 formatted messages sent on the AC power line into...

View full details
$116.00
POWERLINE INTERFACE - ELK M1 (PIM-E)
$238.00

POWERLINE INTERFACE - ELK M1 (PIM-E)

The PIM-E is a special Powerline Interface Module containing an ELK Products built-in M1XSP Serial Port chip. This all-in-one device makes it effor...

View full details
$238.00