The Output Control Module (OCM) provides two independent channels of general purpose isolated relay contact outputs to control motors, lights, or t...
View full details
Adapter to connect a PIM-R to the OMNI interface port. No cable is included. Use the existing HAI PIM cable that connected the OMNI. PCS PIM-R is...
View full details
Empowers the use of mobile devices, smart phones and/or tablets to control PulseWorx systems Apple iPhone, iPad Mini, iPad applications available...
View full details
RS-232 serial interface connects to any available COM port via a DB9 serial cable. The DB9 cable is included. Pass-through outlet allows plugging ...
View full details
USB serial interface connects to any available USB port. USB cable included. Pass-through outlet allows plugging of devices that do not require re...
View full details
Limited Quantity! PIP's Ethernet port is not for internet router or computer's NIC. The Powerline Interface Powerpack (PIP) is an addressable power...
View full details
Simple two-wire installation Red LED displays proper operation Ensures UPB signals cross over from Line 1 to Line 2 at the electrical panel Design...
View full details
Limited in quantity - obsolete item Battery-less design to control PulseWorx lighting system wirelessly. Kinetic energy created by pressing ON/OF...
View full details
The PW513 X-10 to UPB Bridge is a small plug-in electronic device that converts standard X-10 formatted messages into corresponding UPB Communicati...
View full details
Limited quantity in stock. Ongoing production. Handles 120VAC loads up to 15 Amps NEMA 5-15R Configuration Meets the expanded NEC Tamper Resis...
View full details
Connects to a PulseWorx Wall Switch via the yellow “traveler” wire to provide three-way or multi-way control The RWS can be wired as far as 1000 f...
View full details
Will repeat GEN II UPB communication signals at full strength reliability between phases Made of none conductive plastic Mounts in a single gang ...
View full details
Telephone Control Module (TCM)The TCM Telephone Ring Interface Module is a small plug-in device designed to sense a telephone ring to trigger the t...
View full details
TEC Timed Event Controller The Timed Event Controller is a high quality home automation timer device that is capable of transmitting and receiving...
View full details
Quantity limited. Ensures communication on all three-phase 120/208VAC Delta-Wye 60Hz power Bridge the communication gap between phases within mu...
View full details
UPB Home Control Systems Manual. Learn everything you always wanted to know about the exciting new powerline communication technology UPB (Univers...
View full details
Sleek beveled edges. Snap-on application for most decorator-style Available only in White or Ivory For the WS1DL-15 1500 watt wall switch mounting...
View full details
PulseWorx screwless faceplates fit any Decora style devices. With elegant sleek, beveled edges and simple screwless snap-on installation, they lend...
View full details
Sleek beveled edges. Snap-on application for most decorator-style Two colors available; White and Ivory
PulseWorx screwless faceplates fit any Decora style devices. With elegant sleek, beveled edges and simple screwless snap-on installation, they lend...
View full details
PulseWorx screwless faceplates fit any Decora style devices. With elegant sleek, beveled edges and simple screwless snap-on installation, they lend...
View full details
PulseWorx screwless faceplates fit any Decora style devices. With elegant sleek, beveled edges and simple screwless snap-on installation, they lend...
View full details
Built-in relay provides 0-10V dimming capability along with RM-0-10V (required) Adjustable LED brightness and backlighting permits night time vie...
View full details
Use with LED, CFL, Incandescent, Halogen, Fluorescent, Inductive and Magnetic LV Loads. Preset to 30% max dimming to alleviate drop off. Designed...
View full details
Limited in quantity. Obsolete when run out. Use with LED, CFL, Incandescent, Halogen, Fluorescent, Inductive and Magnetic LV Loads. Preset to 30%...
View full details
Use with LED, CFL, Incandescent, Halogen, Fluorescent, Inductive and Magnetic LV Loads. Preset to 30% max dimming to alleviate drop off. I Desig...
View full details
Limited in quantity. This item maybe obsolete when inventory runs out. Designed to control of electronic low voltage AC lighting ballasts or tra...
View full details
Use with heavy loads up to 15 Amp, Motors, Ceiling fans, Pumps etc. ON/OFF operation WS1R QuickStart Guide
Sold out
Limited in quantity. Obsolete when sold out The XPW713 X-10 to UPB Converter is a small plug-in electronic device that converts standard X-10 form...
View full details
Connects to a WS-120 or WS-277 Wall Switch via the yellow “traveler” wire to provide three-way or multi-way control The RWS can be wired as far as...
View full details
One WS 120V Wall Switch - in white - and one RM0-10V Receiving Module at a 20% discount. Install and experience Relay Dimming with your own fixture...
View full details
One WS 277V Wall Switch - in white - and one RM0-10V Receiving Module at a 20% discount. Install and experience Relay Dimming with your own fixture...
View full details
When LED fixtures are installed in office or residential locations it is best to provide a way to change their illumination level for different usa...
View full details
When LED fixtures are installed in office or residential locations it is best to provide a way to change their illumination level for different usa...
View full details
Limited quantity. Ongoing production. Call or email for large quantity inquiry. This product requires our WS-120V / WS-277V / WS1C / KPLC The R...
View full details
The SimpleWorx Digital Astronomical Timer features sixteen user programmed on/off settings - shared on four different channels; each can be set for...
View full details
Currently white color is out of stock. The Desktop Switch Transmitter (DST) provides tabletop control of one group of SimpleWorx receivers anywhere...
View full details
The Keypad Transmitter (KPT4) is an in-wall mounted controller providing control of four groups of SimpleWorx receivers anywhere in your home or of...
View full details
The Desktop Keypad Transmitter (DKT4) is a tabletop controller which provides control of four groups of SimpleWorx receivers anywhere in your home ...
View full details
The FMR module was designed to be flexible enough to control almost any lighting or motor load, which may not have a direct connection to an existi...
View full details
The Fixture Module Transmitter is a wire-in module that provides a single line-voltage input trigger. This input can be connected to any line-volta...
View full details
The Fixture Module Transmitter is a wire-in module that accepts a single low voltage contact closure input to trigger SimpleWorx receivers. The inp...
View full details
The Plug-in Module Relay AC is a remote on/off switch which can be controlled from any SimpleWorx transmitter without the need for control wires. C...
View full details
The Plug-in Module Receiver is a remote device for controlling devices that need a dry contact input. It will control such devices as shades, blind...
View full details
The Plug-In Module Contact Transmitter is a plug-in module that accepts a single low voltage contact closure input to trigger SimpleWorx receivers....
View full details
The RAM-15 Receptacle Module is ideal to remote control one or more 120VAC non-dimming appliances with a maximum rating of 15 Amps. The RAM-15 will...
View full details
The RWS Remote Wall Switch is a auxiliary rocker switch designed to provide three-way or multi-way lighting control to a SimpleWorx Wall Switch Tra...
View full details
The Sunrise Sunset Timer (SST) features an astronomical clock which is capable of turning 120VAC devices ON and OFF based on one of the (10) ten pr...
View full details
