HLC Products work as stand-alone or with a Home Control System. HLC’s two way performance has been optimized for single family homes on 120/240 volt electrical systems.
An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet.
All HLC products use Generation II Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.
For all your HAI documentation downloads and supports, click here.
Equivalent to the HAI 35A00-1 600w Dimming Switch Contains HAI firmware and will be recognized by the PC-Access software and HAI OMNI as a HAI pro...
View full details
Equivalent to the HAI 55A00-1 1000w Dimming Switch Contains HAI firmware and will be recognized by the PC-Access software and HAI OMNI as a HAI pr...
View full details
Equivalent to the HAI 40A00-1 Relay Switch Works along side with RWS (Remote Wall Switch) with traveler wire Use with heavy loads up to 15A, Motor...
View full details
Connects to a PulseWorx Wall Switch via the yellow “traveler” wire to provide three-way or multi-way control The RWS can be wired as far as 1000 f...
View full details
Ongoing production. Limited quantities. Designed for use as a Room Controller with the HAI OMNI. Configured for four room scenes plus ON and OFF....
View full details
Convert one color switch to another color. All the parts needed to do that. Works for all single-gang PulseWorx switches, SimpleWorx switches, and ...
View full details
HLCK6 style keypad button set engraved with the buttons default for HAI keypads. NOTE: This is a set of 6 engraved buttons only. The keypad is not ...
View full details
Adapter to connect a PIM-R to the OMNI interface port. No cable is included. Use the existing HAI PIM cable that connected the OMNI. PCS PIM-R is...
View full details
RS-232 serial interface connects to any available COM port via a DB9 serial cable. The DB9 cable is included. Pass-through outlet allows plugging ...
View full details
